Rain, snow, wind and strong sunlight can affect exposed mining materials and disrupt handling operations. A mining bulk storage tent creates a covered area for suitable ore, aggregates and other industrial materials at the mine site.
WT TENT provides modular aluminum structures with clear spans from 3 to 80 meters. The dimensions and enclosure system can be customized according to the stockpile volume, material properties and loading equipment.
Covered Storage for Mining Materials
A mining bulk storage structure can be used for suitable:
- Ore and mineral materials
- Aggregates and crushed stone
- Sand and gravel
- Coal
- Packaged mining materials
- Processing supplies
- Recyclable or waste materials
Material compatibility, ventilation, fire protection and environmental requirements must be assessed before choosing the enclosure.
Clear-Span Space for Loaders and Trucks
A clear span mining storage building has no central supporting columns. This provides open space for stockpiles, loaders, conveyors and transport vehicles.
Large entrances can be configured for loading and unloading. Internal retaining walls or storage bays may also be planned as independent systems according to the pressure and characteristics of the stored material.
The warehouse tent structure should not directly support bulk material loads unless specifically engineered for that purpose.
Protection in Demanding Weather
WT TENT structures use prefabricated aluminum alloy frames and UV-resistant, flame-retardant and moisture-resistant covering materials.
They can be engineered to withstand Force 12 winds, heavy rain and heavy snow. Final structural performance depends on the building dimensions, installation location, anchoring system and project-specific engineering calculations.
A suitable ore storage building can help keep precipitation away from stored materials while providing a sheltered area for handling operations.
Relocatable Mine Site Storage
Mining stockpiles and processing areas may move as a project develops. A portable mine site warehouse can be dismantled, transported and installed at another suitable location following inspection.
Its modular length can also be adjusted to meet changing storage capacity. This makes the structure suitable for temporary mining projects and expanding mineral operations.
Whether you require an aggregate storage tent, temporary coal storage structure or mineral stockpile storage shelter, WT TENT can develop a configuration for your project.
Contact WT TENT with the material type, required capacity, site conditions and equipment dimensions to receive a customized proposal.
Frequently Asked Questions
What Materials Can Be Stored in a Mining Tent?
The structure may be used for suitable ore, aggregates, coal, sand, gravel and packaged supplies. The properties and storage requirements of each material must be evaluated first.
Can Loaders Operate Inside the Structure?
Yes. The span, height, entrances and operating routes can be planned for loaders and transport vehicles.
Can Bulk Materials Be Placed Against the Tent Walls?
No, unless the system has been specifically designed for those loads. Independent retaining walls or storage bays are normally required.
Can the Mining Storage Tent Be Expanded?
The modular length may be extended when the original design, available site and structural assessment permit it.